Protocol 75 of 81Layer 7FrameAssembly v3.1.2
llms-full.txt
amqpAdvanced Message Queuing Protocol (RabbitMQ)

RabbitMQ Exchanges, Channels & Queue Deliveries (app <-> mq amqp TCP 5672)

Default Port / Protocol
TCP 5672
Host Endpoint Rule
Dual-Stack IPv4/IPv6
Wireshark Display Filter
amqp
Standards & Specs
AMQP 0-9-1
Wire Stack:Ethernet II[802.1Q / QinQ / MPLS]IPv4 / IPv6TCP 5672AMQP 0-9-1

What It Does on the Wire

From the 8-byte "AMQP\x00\x00\x09\x01" greeting to basicpublish and 0xce frame-end markers on TCP 5672, amqp lets you verify message-bus firewall rules without spinning up RabbitMQ.

Advanced Message Queuing Protocol (amqp, AMQP 0-9-1) powers RabbitMQ and enterprise event-driven message queues over TCP port 5672. Connections open with the 8-byte AMQP  protocolheader, negotiate channels (connectionstart, channelopen), route messages via exchange and routingkey (basicpublish, basicdeliver), and keep idle sockets open with heartbeat frames—each terminated by the 0xce frame-end byte.

FrameAssembly computes AMQP frame sizes, Class/Method IDs (10.10 Connection.Start, 20.10 Channel.Open, 60.40 Basic.Publish, 60.60 Basic.Deliver), and the 0xce frame-end marker automatically.

RabbitMQ Cluster & Microservice Firewall Rule Checks (TCP 5672)

Verify VPC and data-center firewall policies between producer services, RabbitMQ brokers, and consumer workers.

Troubleshoot Load Balancer Idle Drops vs AMQP heartbeat Frames

Capture amqp heartbeat channel 0 frames (Type 8) to diagnose NLB/HAProxy TCP idle timeout resets.

Audit Event-Bus Exchange & Routing-Key Traffic in Wireshark

Inspect basicpublish and basicdeliver packets carrying real exchange and routingkey metadata.

Minimal Quickstart (amqp_quickstart.frasm)

Hit Preview Packets to compile in-browser and eyeball timestamps + wire byte lengths, or ship it straight to the Playground.

amqp_quickstart.frasm11 lines
Open in Playground
host producer { ip 10.65.1.15 }
host rabbitmq { ip 10.65.1.56 }
compile {
producer -> rabbitmq tcp syn srcport 55672 dstport 5672 wait 1ms
producer <- rabbitmq tcp syn ack wait 1ms
producer -> rabbitmq tcp ack wait 1ms
producer -> rabbitmq amqp protocolheader wait 1ms
producer <- rabbitmq amqp connectionstart channel 0 wait 2ms
producer -> rabbitmq amqp basicpublish channel 1 exchange "orders" routingkey "order.created" payload "{\"id\":901}"
}

What the Compiler Calculates So You Don't Have To

  • Defaults to TCP destination port 5672 (psh ack) and appends the mandatory 0xce frame-end octet to every AMQP 0-9-1 frame.
  • Emits the exact 8-byte AMQP\x00\x00\x09\x01 connection header on protocolheader so Wireshark locks onto the AMQP dissector.
  • Encodes short-string length prefixes for exchange and routingkey inside Class 60 (Basic.Publish / Basic.Deliver) Method frames.
Multi-Frame Lab · Ready to Compile

Full RabbitMQ Connection Startup, Channel Open, Publish, Deliver & Heartbeat

Walks through TCP 5672 connection startup, opening Channel 1, publishing an audit event to "sec.events", delivering to a worker, and sending a Channel 0 heartbeat.

amqp_rabbitmq_flow.frasm14 lines
Open in Playground
host auth_svc { ip 172.16.65.10 }
host mq_node { ip 172.16.65.56 }
compile {
auth_svc -> mq_node tcp syn srcport 51672 dstport 5672 win 65535 mss 1460 wait 1ms
auth_svc <- mq_node tcp syn ack win 65535 mss 1460 wait 1ms
auth_svc -> mq_node tcp ack wait 1ms
auth_svc -> mq_node amqp protocolheader wait 1ms
auth_svc <- mq_node amqp connectionstart channel 0 wait 2ms
auth_svc -> mq_node amqp channelopen channel 1 wait 2ms
auth_svc -> mq_node amqp basicpublish channel 1 exchange "sec.events" routingkey "login.mfa" payload "{\"user\":\"netadmin\"}" wait 3ms
auth_svc <- mq_node amqp basicdeliver channel 1 exchange "sec.events" routingkey "login.mfa" payload "{\"user\":\"netadmin\"}" wait 10ms
auth_svc <- mq_node amqp heartbeat channel 0
}
Terminal Commands (FrameAssembly CLI v3.1.2)
# 1. Eyeball relative timestamps, ports & wire lengths in your terminal
frameassembly show amqp_rabbitmq_flow.frasm

# 2. Compile .frasm -> classic .pcap (tcpdump/tcpreplay/Suricata) or nanosecond .pcapng
frameassembly amqp_rabbitmq_flow.frasm amqp_rabbitmq_flow.pcap
frameassembly amqp_rabbitmq_flow.frasm amqp_rabbitmq_flow.pcapng

# 3. Round-trip .pcap <-> .frasm whenever you want to scrub or tweak an existing capture
frameassembly reverse amqp_rabbitmq_flow.pcap amqp_rabbitmq_flow_edited.frasm

All amqp Keywords & Header Options

Every sub-keyword and header option is lowercase [a-z0-9]+ with zero underscores — mix and match them in any order after amqp:

src_host -> dst_host amqp [protocolheader | connectionstart | channelopen | basicpublish | basicdeliver | heartbeat] [channel <0..65535>] [exchange "<text>"] [routingkey "<text>"]
Keyword / OptionAccepted ValueDefaultEffect on Packet
protocolheader | connectionstart | channelopen | basicpublish | basicdeliver | heartbeatAMQP 0-9-1 frame/method selectorbasicpublish (channel 1)Selects the 8-byte AMQP header, Method frame (Type 1), or Heartbeat frame (Type 8).
channel <0..65535>16-bit AMQP channel number (0 for connection/heartbeat, >= 1 for work channels)1 (0 on connectionstart/heartbeat)Sets bytes 1..2 of the 7-byte AMQP frame header.
exchange "<text>" | routingkey "<text>"Quoted exchange name and routing keyexchange "", routingkey "test"Populates the Exchange and Routing-Key short strings in basicpublish and basicdeliver.

Cross-Layer Wrappers Valid with amqp

802.1Q VLAN / QinQ / MPLS tags, IPv4/IPv6 QoS & TTL fields, wait gaps, and transport overrides allowed on this protocol

11 options
OptionRange / FormatDefaultEffect on Packet
wait <number><ns|us|ms|s|m>Time gap (ns, us, ms, s, m)10msAdvances the packet timestamp clock after sending this packet and before the next packet (wait 0ns sends back-to-back).
payload "<text>" | hexpayload "<hex>"Quoted text or hex bytes (choose one)OmittedAppends or overrides raw payload bytes ("deadbeef" or "de:ad:be:ef") and updates packet lengths and checksums.
srcmac <mac> | dstmac <mac>Colon, hyphen, or Cisco dot MACHost MAC / RFC multicast MACOverrides the 14-byte Ethernet II source or destination MAC address for this single packet.
vlan <0..4095> [pcp <0..7>] [dei <0|1>]VLAN ID 0..4095, PCP 0..7, DEI 0..1UntaggedWraps the packet in an IEEE 802.1Q VLAN tag (0x8100) with optional 802.1p QoS priority.
qinq <0..4095> [innervlan <0..4095>]Outer S-VLAN 0..4095, Inner C-VLAN 0..4095Untagged (innervlan 1 when qinq is set)Double-tags the packet with outer IEEE 802.1ad S-Tag (0x88a8) plus inner IEEE 802.1Q C-Tag (0x8100).
mpls <0..1048575> [exp|tc <0..7>] [bos <0|1>] [mplsttl <0..255>]Label 0..1048575, exp/tc 0..7, bos 0..1, ttl 0..255Unlabeled (at most 1 mpls tag per packet)Inserts a 32-bit MPLS label header (0x8847) ahead of the Layer 3 header.
ttl <0..255> [dscp <0..63>] [ecn <0..3>]TTL/Hop Limit 0..255, DSCP 0..63, ECN 0..3ttl 64, dscp 0, ecn 0Sets IPv4 TTL or IPv6 Hop Limit plus DiffServ (DSCP) and ECN QoS markings.
ipid <0..65535> [df] [mf] [fragoffset <0..8191>]IPv4 ID, DF/MF flags, fragment offset 0..8191ipid 1, flags 0, fragoffset 0Sets IPv4 Identification, Do-Not-Fragment (df), More-Fragments (mf), and fragment offset (ignored over IPv6).
flowlabel <0..1048575>20-bit IPv6 Flow Label (0..1048575)0Sets the 20-bit IPv6 Flow Label for ECMP routing tests (ignored when running over IPv4 hosts).
srcport <0..65535> | dstport <0..65535>Port number 0..65535srcport 49152 (remembered), TCP 5672Overrides source or destination port and remembers the port pair automatically on <- replies.
seq <number> | acknum <number> | win <0..65535> | syn | ack | psh | fin | rstTCP sequence/ack numbers, window size, flags & RFC 7323 optionspsh ack, win 65535, automatic TCP seq/acknumOverrides automatic TCP sequence tracking, flags, or RFC 7323 options (mss, wscale, sackperm, tsval, tsecr).

Gotchas & Quick Fixes

Heartbeats Always Use Channel 0 Per AMQP 0-9-1

Valid v3.1.2 Syntax
auth_svc <- mq_node amqp heartbeat channel 0

AMQP 0-9-1 requires Type 8 Heartbeat frames to carry channel 0 (channel >= 1 is used for channelopen, basicpublish, and basicdeliver).

Field Guide 03
Poke Stateful Firewalls, Suricata, Zeek & OT Conduits