VLANs, QinQ, MPLS, Tunnel Soup & Dual-Stack IPv6
Stamp 802.1Q / 802.1ad QinQ tags that OS NIC drivers usually eat, stack MPLS/VXLAN/WireGuard/IPsec headers, and reuse one flow(a, b) across IPv4 & IPv6.
- Laptop NIC drivers love eating outer 802.1Q and QinQ tags on live captures — FrameAssembly writes
0x8100,0x88a8, and0x8847straight into the file. - Slap
vlan,qinq,mpls,ttl,dscp,ecn, or IPv6flowlabelonto almost any Layer 3–7 statement. - Write
flow peer_check(a, b) { ... }once and run it on both IPv4 router pairs and IPv6 router pairs.
1. 802.1Q, Carrier QinQ & MPLS Without Driver Tag-Eating
Ever capture on a laptop USB dongle for twenty minutes only to realize Windows or Linux hardware offload silently stripped every 802.1Q tag? FrameAssembly writes exact IEEE 802.1Q (0x8100), 802.1ad QinQ (0x88a8 S-Tag + 0x8100 C-Tag), and 32-bit MPLS (0x8847) shims straight to .pcap.
Use vlan, qinq, and mpls either as pure Layer 2 frames (even between MAC-only switch hosts) or as cross-layer modifiers on any IP/TCP/UDP/L7 frame:
host pe_west { ip 172.16.100.1 mac 00:1c:73:aa:00:01 }host pe_east { ip 172.16.100.2 mac 00:1c:73:aa:00:02 }compile { // 1. Voice VLAN 200 + 802.1p priority 5 (pcp 5) + DiffServ EF (dscp 46) pe_west -> pe_east rtp pt 0 seq 100 timestamp 160 ssrc 0x12345678 vlan 200 pcp 5 dscp 46 wait 2ms // 2. Metro-E QinQ: outer S-VLAN 1000 -> inner C-VLAN 40 carrying OSPF Hello pe_west -> pe_east ospf hello routerid 10.0.0.1 areaid 0 qinq 1000 innervlan 40 pcp 6 wait 2ms // 3. MPLS label 24010 (EXP 6, BoS 1) carrying BGP Keepalive pe_west -> pe_east bgp keepalive mpls 24010 exp 6 bos 1 mplsttl 64}2. Tunnel Soup: VXLAN, GENEVE, GRE, IKEv2, ESP & WireGuard
Need a clean reference .pcap to debug underlay UDP ports, df MTU drops, or VPN firewall ACLs? One compile block covers gre, vxlan (UDP 4789), geneve (UDP 6081), ikev2 (UDP 500), esp / ipsec / ah, and wireguard (UDP 51820):
host vtep_a { ip 10.0.250.11 }host vtep_b { ip 10.0.250.12 }compile { vtep_a -> vtep_b vxlan vni 10500 dscp 16 df wait 2ms vtep_a -> vtep_b geneve vni 20500 optclass 0x0102 opttype 1 wait 2ms vtep_a -> vtep_b ikev2 sainit initiatorspi 0xa1b2c3d4e5f60708 responderspi 0 msgid 0 wait 3ms vtep_a <- vtep_b ikev2 sainit initiatorspi 0xa1b2c3d4e5f60708 responderspi 0x1122334455667788 msgid 0 wait 3ms vtep_a -> vtep_b wireguard initiation sender 0x01020304}3. Dual-Stack Magic: One flow(a, b) for Both IPv4 & IPv6
70 of the 73 Layer 3–7 protocols work identically over IPv4 and IPv6, while icmp, ospf, rip, vrrp, hsrp, and dhcp morph between their v4 and v6 wire encodings automatically based on your host IPs (igmp stays IPv4-only; ndp and mld stay IPv6-only).
Wrap your sequence in flow peer_check(a, b) { ... } once, then call it on both v4 and v6 router pairs:
host rtr_a_v4 { ip 192.0.2.1 }host rtr_b_v4 { ip 192.0.2.2 }host rtr_a_v6 { ip 2001:db8:1::1 }host rtr_b_v6 { ip 2001:db8:1::2 }flow peer_check(a, b) { a -> b icmp echorequest id 50 seq 1 wait 1ms a <- b icmp echoreply id 50 seq 1 wait 2ms a -> b tcp syn srcport 50179 dstport 179 win 65535 mss 1440 wait 1ms a <- b tcp syn ack win 65535 mss 1440 wait 1ms a -> b tcp ack wait 1ms a -> b bgp open asn 4200000001 holdtime 90 bgpid 192.0.2.1}compile { peer_check(rtr_a_v4, rtr_b_v4) peer_check(rtr_a_v6, rtr_b_v6)}asn > 65535) Just WorkPass asn 4200000001 and FrameAssembly automatically puts AS_TRANS (23456) in the legacy 16-bit slot + appends RFC 6793 Capability 65 with your 32-bit ASN.